Mercury 15 FourStroke User Manual

MAINTENANCE
96
3. Remove the fill/drain plug, vent plug, and drain the lubricant.
a
b
31932
a - Vent plug
b - Fill/drain plug
GEARCASE LUBRICANT CAPACITY
Approximately 370 ml (12.5 fl. oz.).
GEARCASE LUBRICANT RECOMMENDATION
Mercury or Quicksilver Premium or High Performance Gear
Lubricant.
CHECKING LUBRICANT LEVEL AND REFILLING
GEARCASE
1. Place the outboard in a vertical operating position.
2. Remove the vent plug from the vent hole.
3. Place the lubricant tube into the fill hole and add lubricant until
it appears at the vent hole.
IMPORTANT: Replace the sealing washers with new sealing
washers.
4. Stop adding lubricant. Install the vent plug and sealing washer
before removing the lubricant tube.

Mercury 15 FourStroke Specifications

General

Brand	Mercury
Model	15 FourStroke
Category	Outboard Motor
Language	English