ENGINE INSTALLATION
114
Assemble steering link rod to engine with bolt, locknut, spacer, and
flat washers. Torque the locknut to specifications.
a - Bolt (12‑71970)
b - Flat washer
c - Spacer
d - Nylon insert locknut (11‑16147‑‑3)
e - Steering bracket
f - Nylon insert locknut (11‑16147‑‑3) (tighten until it seats,
then back off 1/4 turn)
Description Nm lb. in. lb. ft.
Nylon insert locknut "d" 27 239 20
Nylon insert locknut "f"
Tighten until it seats, then back off 1/4
turn