Mercury 2.5 Operation And Installation Manual

Trailering Boat
IMPORTANT: The tilt lock mechanism is not intended to support the outboard
in the tilted up position when trailering. Use of the tilt lock mechanism could
allow the outboard to bounce and drop down causing damage to the outboard.
The boat should be trailered with the outboard tilted down (normal operating
position).
If additional ground clearance is required, remove the outboard from the boat
and store securely. Additional clearance may be needed for railroad crossings,
driveways, and trailer bouncing.
Side shift models ‑ Set the gear shift into forward gear. This prevents the
propeller from spinning freely.
28381
TRANSPORTING
24 eng

Mercury 2.5 Specifications

General

Fuel Induction System	Carburetor
Ignition	CDI
Starting	Manual
Steering	Tiller
Cylinders	1
Recommended Fuel	87 Octane
Shaft Length	15 in (381 mm)
Horsepower	2.5 HP
Gear Shift	Forward, Neutral