Mercury 20 User Manual

FEATURES & CONTROLS
30
ob01078
NOTE: Trim tab adjustment will have little effect reducing steering torque if the outboard is installed with the
anti‑ventilation plate approximately 50mm (2 inches) or more above the boat bottom.
Operate your boat at normal cruising speed, trimmed to the desired position. Turn your boat left and right and
note the direction the boat turns more easily.
If adjustment is necessary, loosen trim tab bolt and make small adjustments at a time. If the boat turns more
easily to the left, move the trailing edge of trim tab to the left. If the boat turns more easily to the right move the
trailing edge of trim tab to the right. Retighten bolt and retest.

Mercury 20 Specifications

General

Exhaust	Through Prop
Starting	Manual
Steering	Tiller
Shaft Length	15"
Horsepower	20 HP