Mercury 20 User Manual

MAINTENANCE
53
ob01418
• Tilt Tube ‑ Lubricate through fittings.
ob01419
• Lubricate the throttle and shift cable moving components and pivot locations.
3063
!
WARNING
The end of the steering cable must be fully retracted into the outboard tilt tube before adding lubricant.
Adding lubricant to steering cable when fully extended could cause steering cable to become hydraulically
locked. A hydraulically locked steering cable will cause loss of steering control, possibly resulting in serious
injury or death.
• Steering Cable Grease Fitting (If equipped) ‑ Rotate steering wheel to fully retract the steering cable
end into the outboard tilt tube. Lubricate through fitting.

Mercury 20 Specifications

General

Exhaust	Through Prop
Starting	Manual
Steering	Tiller
Shaft Length	15"
Horsepower	20 HP