Mercury 200XRI User Manual

CHARGING & STARTING SYSTEM
90-883728 JULY 2001 Page 2B-35
6. To prevent damage to brushes and springs when installing commutator end cap, it is
recommended that a brush retaining tool be made as shown:
METRIC SCALE
3”
2”
1-3/4”
1-11/16”
3/4”
1/2”
= 76.2mm
= 50.8mm
= 44.5mm
= 42.9mm
= 19.1mm
= 12.7mm
18-Gauge Sheet Metal
7. Lubricate bushing (located in commutator end cap) with one drop of SAE 10W oil. DO
NOT over lubricate.

Mercury 200XRI Specifications

General

Brand	Mercury
Model	200XRI
Category	Engine
Language	English