Mercury 25 TwoStroke - Page 51

SET THE LANYARD STOP SWITCH TO RUN POSITION
Be sure to connect the lanyard stop switch to your body. The engine will shut
down if the stop lanyard is disconnected.
Tiller handle models
a - Lanyard stop switch
b - Stop switch lock
c - Hook
Remote control models
a - Hook
b - Off
c - On
d - Lanyard stop switch
NOTE: The engine will not start unless this switch has been properly connected
and locked beforehand. Refer to
General Information ‑ Lanyard Stop Switch .
37465
a
b
c
37716
a
b
c
d
OPERATION
eng 41