Remote control models: Shift the outboard only when the engine is at idle
speed. To change Forward (F) to Reverse (R), first idle the engine and shift into
Neutral (N). With the engine still running, slowly engage and gradually increase
the reverse speed.
NOTE: Confirm that the reverse lock lever is at the lock position.
a - Reverse lock lever: R =
Release, L = Lock
Stopping the Engine
1. Tiller handle models: Reduce the speed to trolling speed by turning the
throttle grip to the slow position.
2. Place the shift lever at Neutral (N).
3. Press the stop switch until the engine stops completely, or pull the lanyard
stop switch.
To Next Page
Loading...
