2. Remove the starter rope.
3. Wind a pull rope around the flywheel.
4. Use a 10 mm socket wrench as a pull grip, as shown below.
5. Remote control models: Ensure the key switch is in the on position.
NOTE: Confirm that the shift lever is in Neutral (N).
!
WARNING
The exposed moving flywheel can cause serious injury. Keep your hands,
hair, clothing, tools, and other objects away from engine when starting or
running the engine. Do not attempt to reinstall the rewind starter assembly or
top cowl when engine is running.
OPERATION
eng 49
To Next Page
Loading...
