Section 5 - Storage
Page 82 90-8M0113856 eng DECEMBER 2015
b. Bottom of exhaust manifold.
a - Exhaust manifold drain plug
3. Clean out the drain holes with a stiff piece of wire until the entire system is drained.
NOTE: It may be necessary to lift or bend hoses to allow water to drain completely.
4. Remove and lower the hose from the water inlet to the power steering cooler (if equipped), or the water inlet to the heat
exchanger.
a - Power steering cooler, if equipped
b - Water inlet to heat exchanger hose
To Next Page
Loading...
