EasyManuals Logo

Mercury 300XS OptiMax User Manual

Mercury 300XS OptiMax
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
FUEL AND OIL
42
IMPORTANT: Always make sure the oil tank caps are threaded
on tight. An air leak will prevent oil flow to the engine.
or27
Filling Engine Mounted Oil Reservoir Tank
Remove the top cowl. Loosen the fill cap on the engine oil reservoir
tank. Run the engine until all the air has been vented out of the oil
reservoir tank and tank is filled with oil to the point of overflow.
Re-tighten the fill cap. Stop the engine and replace the top cowl.
or28
NOTE: Filling this tank is only necessary if the oil level should ever
drop and the low oil warning system is activated.
Filling Fuel Tank
Fill fuel tanks outdoors away from heat, sparks, and open
flames.
Remove portable fuel tanks from boat to refill them.
Always stop engine before refilling tanks.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury 300XS OptiMax and is the answer not in the manual?

Mercury 300XS OptiMax Specifications

General IconGeneral
Engine Type2-Stroke
Horsepower300 HP
Alternator Output60 amp / 756 watt
Gear Ratio1.75:1
Starting SystemElectric
Fuel System2-Stage Direct Fuel Injection (DFI)
Weight505 lbs / 229 kg
Cylinders6
SteeringHydraulic
Shaft Length25"

Related product manuals