Mercury 300XS OptiMax - Checking Power Trim Fluid (Single-Ram Trim Systems)

MAINTENANCE
82
Checking Power Trim Fluid (Single-Ram Trim
Systems)
1. Place outboard in the full down/in position.
or52
2. Check the fluid level in the trim pump reservoir. The level
should be between the "MIN" and "MAX" level marks on the
reservoir.
3. If necessary, remove the yellow fill cap and add Power Trim
and Steering Fluid until the level in the reservoir reaches the
"MIN" level mark. It is acceptable to fill the reservoir beyond
the "MIN" level mark, but do not overfill past the "MAX" level
mark.
114
15033
Tube Ref No. Description Where Used Part No.
114
Power Trim and
Steering Fluid
Trim pump reservoir 92-802880A1