OPERATION
60
5. Shift the outboard to the neutral position.
N
ob00351
6. Do not advance the neutral fast idle speed feature on the
remote control for starting (if equipped).
ob00560
7. Turn the ignition key to the "START" position. Release the key
when the engine starts. If the engine fails to start in ten
seconds, return the key to the "OFF" position, wait one
second, and try again.
8. Check for water coming out of the water pump indicator hole.
or55
NOTE: The electronic starting system will automatically prime
(choke) the engine and increase idle speed for starting.
To Next Page
Loading...
