MAINTENANCE
65
• Visually check steering link rod fasteners for wear. Lubricate
all components (refer to the Installation Manual for
lubrication specifications). Check all attachment hardware for
proper torque tightness.
• Check level and condition of gearcase lubricant.
• Check alternator belt tension.
EVERY 50 HOURS OR ONCE A YEAR, WHICHEVER
OCCURS FIRST
• Lubricate all lubrication points.
• Lubricate splines on the drive shaft.
• Lubricate entire length of drive shaft with anti-corrosion
grease.
• Lubricate splines on the propeller shaft.
• Drain and replace gearcase lubricant.
• Check the spark plug gap. Clean and replace plugs if
necessary.
• Inspect all belts, pulleys, and idler pulleys for deterioration.
• Check fuel pressure.
• Check control cable adjustments.
• Inspect battery.
• Check corrosion control anodes.
• Check tightness of bolts, nuts and other fasteners.
• Check power trim fluid.
• Remove engine deposits with Power Tune Engine Cleaner.
EVERY 100 HOURS OR ONCE A YEAR, WHICHEVER
OCCURS FIRST
• Replace water pump impeller (more often if overheating
occurs or reduced water pressure is noted).
1.
• Use QuicKleen in fuel.
EVERY 100 HOURS OF OPERATION
• Inspect Carbon Fiber reeds for chipping or cracks.
1. These items should be serviced by a authorized dealer.
To Next Page
Loading...
