Mercury 45 Operator's Manual

MAINTENANCE
53
6. Coat the propeller shaft with Quicksilver or Mercury Precision Lubricants Anti‑Corrosion Grease or 2‑4‑C
with Teflon.
ob00378
Tube Ref No. Description Where Used Part No.
94
Anti-Corrosion Grease Propeller shaft 92-802867Q1
95
2-4-C with Teflon Propeller shaft 92-802859Q1
IMPORTANT: To prevent the propeller hub from corroding and seizing to the propeller shaft (especially in salt
water), always apply a coat of the recommended lubricant to the entire propeller shaft at the recommended
maintenance intervals, and also each time the propeller is removed.
7. Flo‑Torq I Drive Hub Propellers ‑ Install thrust washer, propeller, continuity washer, thrust hub, propeller
nut retainer, and propeller nut onto the shaft.
ob00382
a
b c
d
e
f
a - Propeller nut
b - Propeller nut retainer
c - Thrust hub
d - Continuity washer
e - Propeller
f - Thrust washer
8. Flo‑Torq II Drive Hub Propellers ‑ Install forward thrust hub, replaceable drive sleeve, propeller, thrust hub,
propeller nut retainer and propeller nut onto the shaft.

Mercury 45 Specifications

General

Horsepower	45 HP
Cylinders	3
Starting	Electric
Full Throttle RPM Range	5000-6000 RPM
Steering	Remote
Exhaust	Through Prop
Shaft Length	20 in