Mercury 45 User Manual

OPERATION
47
ob00625
a
b
a
b
ob00333
a - Reverse/tilt position b - Lock/run position
8. Tiller handle models - Move throttle grip to "START" position.
0%100
START
START
3075
9. Remote control models - Move on/off switch to the on position.
3026
NOTE: Manual starting models - For initial start of a new engine or first start after a prolonged storage, primer lines
may have air in them. In this case, push in the primer bulb several times until fluid can be felt and then the normal
4 to 6 rapid primes.
10. Manual starting models - If engine is cold, push in the primer bulb rapidly 4 to 6 times.

Mercury 45 Specifications

General

Horsepower	45 HP
Cylinders	3
Starting	Electric
Full Throttle RPM Range	5000-6000 RPM
Steering	Remote
Exhaust	Through Prop
Shaft Length	20 in