Mercury 45 User Manual

MAINTENANCE
67
2. Lubricate the following with Quicksilver or Mercury Precision Lubricants 2-4-C with Teflon or Special Lubricant
101.
• Swivel Bracket - Lubricate through fitting.
ob00635
• Tilt Tube - Lubricate through fitting.
• Co-Pilot Shaft (Tiller Handle Models) - Lubricate through fitting. Move the steering friction lever back
and forth while lubricating.
3089
a
b
a
a - Tilt Tube b - Co-pilot shaft
• Lubricate threads of transom clamp screws (if equipped).
ob00637
• Shift Handle (Tiller Handle Models) - Lubricate through fittings.
3091
• Steering Cable Grease Fitting (If equipped) - Rotate steering wheel to fully retract the steering cable
end into the outboard tilt tube. Lubricate through fitting.

Mercury 45 Specifications

General

Horsepower	45 HP
Cylinders	3
Starting	Electric
Full Throttle RPM Range	5000-6000 RPM
Steering	Remote
Exhaust	Through Prop
Shaft Length	20 in