Mercury 50 Operator's Manual

OPERATION
42
• After shifting outboard into gear, advance the remote control lever or rotate the throttle grip (tiller handle)
to increase speed.
Stopping The Engine
1. Remote Control Models ‑ Reduce engine speed and shift outboard to neutral position. Turn ignition key to
"OFF" position.
ob00360
2. Tiller Handle Models ‑ Reduce engine speed and shift outboard to neutral position. Push in the engine stop
button or turn ignition key to "OFF" position.
ob00361
Emergency Starting
If the starter system fails, use the spare starter rope (provided) and follow procedure.
NOTE: EFI models ‑ Engine must have a fully charged battery to start the engine.
1. Remove flywheel cover or manual starter assembly.
ob00362
2. Shift outboard to neutral (N) position.
N
N
ob00363

Mercury 50 Specifications

General

Horsepower	50 hp
Cylinders	3
Steering	Remote
Starting	Electric
Displacement	995 cc
Fuel Induction System	EFI (Electronic Fuel Injection)
Alternator Output	18 amp
Shaft Length	20" / 508 mm
Dry Weight	112 kg
Engine Type	4-Stroke