Mercury 50 User Manual

MAINTENANCE
86
• Shift Handle (Tiller Handle Models) ‑ Lubricate through
fittings.
3091
• Steering Cable Grease Fitting (If equipped) ‑ Rotate
steering wheel to fully retract the steering cable end into
the outboard tilt tube. Lubricate through fitting.
!
WARNING
Incorrect cable lubrication can cause hydraulic lock, leading to
serious injury or death from loss of boat control. Completely
retract the end of the steering cable before applying lubricant.
3113
a
b
a - Fitting b - Steering cable end
3. Lubricate the following with light weight oil.

Mercury 50 Specifications

General

Horsepower	50 hp
Cylinders	3
Steering	Remote
Starting	Electric
Displacement	995 cc
Fuel Induction System	EFI (Electronic Fuel Injection)
Alternator Output	18 amp
Shaft Length	20" / 508 mm
Dry Weight	112 kg
Engine Type	4-Stroke