Mercury 50 User Manual

MAINTENANCE
87
• Steering Link Rod Pivot Points ‑ Lubricate points.
3114
Checking Power Trim Fluid
1. Tilt outboard to the full up position and engage the tilt lock pin.
3115
2. Remove fill cap and check fluid level. The fluid level should be
even with the bottom of the fill hole. Add Quicksilver or
Mercury Precision Lubricants Power Trim & Steering Fluid. If
not available, use automotive (ATF) automatic transmission
fluid.
27683

Mercury 50 Specifications

General

Horsepower	50 hp
Cylinders	3
Steering	Remote
Starting	Electric
Displacement	995 cc
Fuel Induction System	EFI (Electronic Fuel Injection)
Alternator Output	18 amp
Shaft Length	20" / 508 mm
Dry Weight	112 kg
Engine Type	4-Stroke