Mercury 6 SERIES - Water Tube

MID-SECTION
90-857138R1 MAY 2000 Page 5-13
Water Tube
1. Install water tube into drive shaft housing, as shown.
a
b
a
d
c
56384
56385
a - Water Tube
b - Water Tube Seal
c - Guide Plate
d - Screw (2)
2. Install shift linkage, as outlined in Section 8 “Shift Linkage.”
3. Install powerhead, as outlined in Section 4A “Powerhead.”
4. Install gear housing, as outlined in Section 6 “Gear Housing.”