Mercury 6 SERIES

SHIFT LINKAGE
Page 7A-6 90-857138R1 MAY 2000
3. Install starter lock rod and secure with snap.
a
b
56990
a-Starter Lock Rod
b-Snap
4. Install upper shift shaft assembly into drive shaft housing.
5. Secure lever on shaft of shift lever with screw as shown. Tighten screw securely.
57236
a
57235
b
c
d
a-Shift Shaft Assembly
b-Lever
c-Shaft
d-Screw
6. Reinstall powerhead. Refer to Section 4B “Powerhead.”
7. Reinstall gear housing. Refer to Section 6 “Gear Housing.”