Mercury 6 SERIES

TILLER HANDLE
Page 7B-8 90-857138R1 MAY 2000
5. Pushing handle grip against rubber spacer, to align holes and secure grip to end of
throttle shaft, using screw.
6. Apply 2-4-C Marine Lubricant to handle and install nylon washer, spacer and outer bush-
ing onto tiller handle.
a
b
56613
d
c
e
f
95
2-4-C With Teflon (92-825407A12)
95
a-Screw
b-Handle Grip
c-Nylon Washer
d-Handle
e-Spacer
f-Outer Bushing
7. Lubricate pulley of throttle shaft, with 2-4-C w/Teflon Marine Lubricant.
a
95
2-4-C With Teflon (92-825407A12)
95
56545
a-Pulley