Mercury 60 SeaPro - Propeller Replacement-Command Thrust Gearcase

Description Nm lb‑in. lb‑ft
Propeller nut 75 – 55
10. Secure propeller nut by bending tabs up and against the flats on the
propeller nut.
a - Pins
b - Tabs
11. Install the spark plug leads.
Propeller Replacement–Command Thrust Gearcase
!
WARNING
Rotating propellers can cause serious injury or death. Never operate the boat
out of the water with a propeller installed. Before installing or removing a
propeller, place the drive unit in neutral and engage the lanyard stop switch
to prevent the engine from starting. Place a block of wood between the
propeller blade and the anti‑ventilation plate.
1. Shift outboard to neutral (N) position.
N
26838
N
29176
a
b
a
b
26906
MAINTENANCE
eng 61