!
WARNING
Incorrect cable lubrication can cause hydraulic lock, leading to serious
injury or death from loss of boat control. Completely retract the end of the
steering cable before applying lubricant.
a - Fitting
b - Steering cable end
3. Lubricate the following with lightweight oil.
• Steering link rod pivot points ‑ Lubricate pivot points.
Lubrication Points–SeaPro/Marathon Models
1. Lubricate the following with Extreme Grease or 2‑4‑C with PTFE.
Tube Ref
No.
Description Where Used Part No.
Extreme Grease
Propeller shaft, swivel bracket, tilt
support lever, tilt tube, tiller handle,
clamp screw threads
8M0071842
95
2-4-C with PTFE
Propeller shaft, swivel bracket, tilt
support lever, tilt tube, tiller handle,
clamp screw threads
92-802859A 1
•
Propeller shaft ‑ Refer to Propeller Replacement for removal and
installation of the propeller. Coat the entire propeller shaft with
lubricant to prevent the propeller hub from corroding and seizing to the
shaft.
• Swivel bracket ‑ Lubricate through fitting.
MAINTENANCE
eng 67
To Next Page
Loading...
