Mercury 9.9 Bigfoot 4-Stroke - Remote Control Features

FEATURES AND CONTROLS
36
4676
Remote Control Features
Your boat may be equipped with one of the Mercury Precision or Quicksilver remote controls shown. If not, consult
your dealer for a description of the functions and operations of the remote control.
ee
aa
dd
dd
ee
ff
gg
aa
bb
ff
cc
gg
hh
bb
cc
aa
ff
ii
cc
ii
ob00329
a - Control handle ‑ forward, neutral, reverse.
b - Neutral release lever
c - Trim/tilt switch (if equipped). ‑ Refer to
Features & Controls ‑ Power Trim and Tilt.
d - Lanyard stop switch ‑ Refer to General
Information ‑ Lanyard Stop Switch.
e - Lanyard ‑ Refer to General Information ‑
Lanyard Stop Switch.
f - Throttle friction adjustment ‑ Console controls
require cover removal for adjustment.
g - Ignition key switch ‑ "OFF," "ON," START."
h - Fast idle lever ‑ Refer to Operation ‑ Starting
the Engine.
i - Throttle only button ‑ Refer to Operation ‑
Starting the Engine.
Warning System
The warning system on this engine does not have a warning horn. Instead, there is an oil pressure light located
on the front of the engine. If oil pressure drops below 25 kPa (3.6 PSI) the oil pressure light will illuminate, the
Engine Guardian System will be activated, and engine RPM will be limited to 3000.
The Engine Guardian System will also limit RPM of the engine in the event of an over‑speed condition due to
cavitation, no load on propeller, and/or under propped.