Mercury 9.9 ProKicker User Manual

ENGINE INSTALLATION
132 eng
Assemble steering link rod to steering cable with flat washer and
nylon insert locknut. Tighten locknut until it seats, then back nut
off 1/4 turn.
Assemble steering link rod to engine with bolt, locknut and
spacer and flat washers. Torque locknut to specifications.
Remote Wire Harness Connection
1. Remove the cover and cable receptacle bracket from the
bottom cowl.
a - Cover
a - Cable receptacle bracket
a
28003
a
28107

Mercury 9.9 ProKicker Specifications

General

Brand	Mercury
Model	9.9 ProKicker
Category	Outboard Motor
Language	English