Section 4 - Maintenance
90-8M0113986 eng DECEMBER 2015 Page 33
6. Discard the oil filter and O‑ring.
a - Drain plug
b - Oil filter cover
c - O‑ring
d - Oil filter
7. Apply sealant to the threads of the oil filter housing drain plug and install.
Tube Ref No. Description Where Used Part No.
9
Loctite 567 PST Pipe Sealant Drain plug threads 92-809822
8. Tighten the oil filter housing drain plug to the specified torque.
Engine Coolant Oil Cooler
Description Nm lb‑in. lb‑ft
Drain plug 19 168 –
9. Install a new O‑ring onto the oil filter cover and lubricate with engine oil.
10. Push the filter element into the cover until it is locked. Listen for a click.
11. Install the oil filter housing cover onto the oil filter housing and tighten to the specified torque.
IMPORTANT: Overtightening the cover may cause an oil leak.
Engine Coolant Oil Cooler
Description Nm lb‑in. lb‑ft
Engine oil filter housing cover 25 – 18
12. Remove the dipstick.
a - Oil fill cap
b - Dipstick
To Next Page
Loading...
