Mercury Big Tiller - TILLER HANDLE TILT LOCK-3 POSITION HANDLE

TILLER HANDLE TILT LOCK—3 POSITION HANDLE
The tilt lock feature allows for the tiller handle to be tilted up and locked in
either the mid tilt angle position or full tilt angle position. When using the tilt lock
feature, move the tiller handle to the desired position and rotate the tilt lock
knob clockwise so that the cross pin will access the through slot. Push in the tilt
lock knob to engage the lock. Release the lock by pulling out the tilt lock knob
and turning it counterclockwise.
a - Mid tilt angle position
b - Full tilt angle position
c - Tilt lock knob
a
b
c
33369
TILLER HANDLE ADJUSTMENTS
eng 7