Maintenance
Page 1B-2 90-8M0065421 NOVEMBER 2012
Lubricants, Sealants, Adhesives
Tube Ref No. Description Where Used Part No.
34
Special Lubricant 101
Steering friction knob threads, swivel bracket bushing, tilt support
pin, transom clamp screws
92-802865Q02
82
Premium Gear Lubricant Gearcase 92-858058K01
95
2-4-C with PTFE
Steering friction knob threads, swivel bracket bushing, tilt support
pin, transom clamp screws
92-802859A 1
120
Corrosion Guard External metal surfaces 92-802878 55
EPA Emission Regulations
All new outboards manufactured by Mercury Marine are certified to the United States Environmental Protection Agency, as
conforming to the requirements of the regulations for the control of air pollution from new outboard motors. This certification is
contingent on certain adjustments set to factory standards. For this reason, the factory procedure for servicing the product must
be strictly followed and, wherever practicable, returned to the original intent of the design. Maintenance, replacement, or repair
of the emission control devices and systems may be performed by any marine spark ignition (SI) engine repair establishment or
individual.
Emission Certification Label
An emission certification label, showing emission levels and engine specifications directly related to emissions, is placed on the
engine at time of manufacture.
a - Piston displacement
b - Maximum emission output for the engine
family
c - Percent of fuel line permeation
d - Timing specification
e - Family number
f - Engine family description
g - Engine power ‑ kilowatts
h - Idle speed
Owner Responsibility
The owner/operator is required to have routine engine maintenance performed to maintain emission levels within prescribed
certification standards.
The owner/operator is not to modify the engine in any manner that would alter the horsepower or allow emission levels to
exceed their predetermined factory specifications.
Selecting Accessories for Your Outboard
Genuine Mercury Precision or Quicksilver Accessories have been specifically designed and tested for your outboard. These
accessories are available from Mercury Marine dealers.
IMPORTANT: Check with your dealer before installing accessories. The misuse of approved accessories or the use of
nonapproved accessories can damage the product.
Some accessories not manufactured or sold by Mercury Marine are not designed to be safely used with your outboard or
outboard operating system. Acquire and read the installation, operation and maintenance manuals for all your selected
accessories.
Inspection and Maintenance Schedule
Before Each Use
• Check the engine oil level.
• Visually inspect the fuel system for deterioration or leaks.
• Check outboard for tightness on transom.
• Check propeller blades for damage.
2008
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
THIS ENGINE CONFORMS TO 2010 CALIFORNIA AND U.S. EPA EMISSION
REGULATIONS FOR SPARK IGNITION MARINE ENGINES. REFER TO OWNER’S
MANUAL FOR REQUIRED MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
PLEASE PERFORM THE ENGINE MAINTENANCE CORRECTLY.
FAMILY :
MERCURY MARINE
EMISSION CONTROL INFORMATION
a
DISPLACEMENT :
FEL : HC+NOx=
LOW-PERM/HIGH-PERM :
TIMING :
IDLE SPEED (IN GEAR) :
MAXIMUM POWER :
HP :
2008
b
c
d
e
f
g
h
43058
CO=
To Next Page
Loading...
Need help?
General
