Name of engine family
Unique engine identification number: starting serial
number
EC Module H certificate number
8.2 H.O. 2A000000 RCD‑H‑1 R1
8.2 Horizon ECT 2A000000 RCD‑H‑1 R1
8.2 H.O. ECT 2A000000 RCD‑H‑1 R1
Essential requirements
Standards
Other normative document/
method
Technical file
Please specify in more detail
(* = mandatory standard)
Annex 1.B—Exhaust Emissions
B.1 engine identification ☐ ☐ ☒
B.2 exhaust emission requirements ☒* ☐ ☐ * EN ISO 8178‑1:1996
B.3 durability ☐ ☐ ☒
B.4 owner's manual ☒ ☐ ☐ ISO 8665:2006
Annex 1.C—Noise Emissions
see Declaration of Conformity of the craft in which the engines have been installed
This declaration of conformity is issued under the sole responsibility of the manufacturer. I declare on behalf of the engine
manufacturer that the engines will meet the exhaust emission requirements of Directive 94/25/EC as amended by Directive
2003/44/EC when installed in a recreational craft, in accordance with the engine manufacturer's supplied instructions and that
these engines must not be put into service until the recreational craft into which they are to be installed has been declared in
conformity with the relevant provisions of the above mentioned Directives.
Name and function:
John Pfeifer
President, Mercury Marine,
Fond du Lac, WI, USA
Signature
Date and place of issue:
April 15, 2014
Fond du Lac, Wisconsin, USA
Regulatory contact:
Regulations and Product Safety Department
Mercury Marine
W6250 W. Pioneer Road
Fond du Lac, WI 54936
USA
Identification Record
Please record the following information:
Engine Model and Horsepower Engine Serial Number
Transom Assembly Serial Number (Sterndrive) Gear Ratio Sterndrive Unit Serial Number
Transmission Model (Inboard) Gear Ratio Transmission Serial Number
Propeller Number Pitch Diameter
Hull Identification Number (HIN) Purchase Date
Boat Manufacturer Boat Model Length
To Next Page
Loading...
Need help?
General