Section 3 - On The Water
Page 52 90-864197084 NOVEMBER 2008
Standby
• In standby mode, the display shows a digital compass value and the angle of the drives when engaged.
• The compass value is the actual current heading from the Axius CAN.
• On the right side of the screen, an icon labeled "OFF" indicates that the Axius track pad is not engaged.
Standby and Active Lights
Axius Plus CAN Control Pad is disengaged (off) when the "STANDBY" light is illuminated. You must press a button to engage a
mode.
When the "ACTIVE" light is illuminated one mode of Axius is engaged (on).
a - "STANDBY" light
b - "ACTIVE" light
Power Icon
The power icon indicates a button that engages or disengages an Axius Plus CAN Control Pad function indicated on the
button.
If you press a button that has the power icon
when that button light is on, the light turns off for that button and the "STANDBY"
light illuminates.
If you press a button with the power icon when that button light is off, the light turns on for that button, a single beep sounds,
and the "ACTIVE" light illuminates.
Button with power icon
a - "AUTO HEADING" button
b - Power icon
Auto Heading
1. At least one engine must be running for auto heading to function.
RESUME
STANDBY ACTIVE
AUTO
HEADING
TURN
TURN
32506
a
b
RESUME
STANDBY ACTIVE
AUTO
HEADING
TURN
TURN
32507
a
b
To Next Page
Loading...
