Section 3 - On The Water
Page 66 90-864197084 NOVEMBER 2008
1. Press the "TURN" button in the direction of the desired heading change. Each press of the button changes the desired heading
by 10°.
a - Port "TURN" button
b - Starboard "TURN" button
2. Move (press) the joystick in the desired direction to make small adjustments in the chosen heading. Each recognized
movement adjusts the chosen heading by 1°.
NOTE: The joystick must move over 50% of its travel for the movement to be recognized as input.
24707
Adjusting heading to starboard
To Resume a Heading
The "RESUME" button light is on if the previous course heading is available to resume.
IMPORTANT: The previous heading can only be resumed within one minute of Auto Heading being disengaged or if the boat has
not turned more than 180°.
Press the "RESUME" button to resume the previous heading if you:
• Turned the steering wheel and disengaged Auto Heading.
To Next Page
Loading...
