Section 3 - On The Water
90-864197084 NOVEMBER 2008 Page 73
4. A horn beep sounds on VesselView and the green circle icon on the Axius Premier screen will display "TRACK." The "TRACK"
icon on the VesselView screen should illuminate.
Waypoint Sequence TRACK icon
5. If you are in a waypoint arrival zone set by the chart plotter, Waypoint Sequence mode only informs Axius Premier it is OK to
proceed to next waypoint. Waypoint Sequence mode acts as a waypoint acknowledge function and Axius Premier sounds a
horn beep when in the zone.
!
WARNING
In some Precision Pilot modes—"Auto Heading," "Track Waypoint," and "Waypoint Sequence"—the boat navigates a preset
course. The boat does not automatically respond to hazards such as other watercraft, obstacles, swimmers, or underwater
terrain. Collision with these hazards could cause boat damage, serious injury, or death. The operator must stay at the helm,
ready to evade hazards and warn others of course changes.
6.
Press the enter button to acknowledge it is OK to turn. The enter button is in the upper right corner of VesselView and has a
check mark symbol. Once acknowledged, Axius Premier Trackpad tracks to the next waypoint in the route.
7. Stay alert; the boat turns automatically in this mode. The operator must know if it is safe to turn when the vessel is entering
a waypoint arrival zone. Inform passengers that the boat automatically turns so they can be prepared.
Waypoint acknowledge screen
To Next Page
Loading...
