Section 3 - On The Water
90-864197084 NOVEMBER 2008 Page 53
2. Press the "AUTO HEADING" button to engage Axius. The button illuminates and a single beep sounds. A double beep sounds
if auto heading does not engage.
a - "AUTO HEADING" button
b - Power icon
3. Axius holds the compass heading the boat is following when the "AUTO HEADING" button is pressed.
4. To make adjustments in the default heading while auto heading is active and the button light is on, press the respective
"TURN" button on the trackpad or tap (quickly move) the joystick.
5. To make a turn:
• Press one of the "TURN" buttons in the direction you want to turn. Each press of the button changes the desired heading
by 10°.
a - Port "TURN" button
b - Starboard "TURN" button
RESUME
STANDBY ACTIVE
AUTO
HEADING
TURN
TURN
32507
a
b
RESUME
STANDBY ACTIVE
AUTO
HEADING
TURN
TURN
32508
a
b
To Next Page
Loading...
