Section 3 - On The Water
90-864197084 NOVEMBER 2008 Page 67
• Pressed one of the "TURN" (course adjust) buttons with Auto Heading engaged.
a - Port "TURN" button
b - Starboard "TURN" button
c - "RESUME" button
d - "AUTO HEADING" button
Disengaging Auto Heading
1. Disengage the Auto Heading mode with any of the following actions:
• Place the ERC handles for both engines in neutral. The "AUTO HEADING" button light turns off and the Standby light
comes on.
• Turn the steering wheel beyond the electronic detent. The "AUTO HEADING" button light turns off and the Resume light
comes on.
• Press the "AUTO HEADING" button on the Axius Premier CAN touchpad. The "AUTO HEADING" button light turns off
and the Standby light comes on.
a - Port "TURN" button
b - Starboard "TURN" button
c - "RESUME" button
d - "AUTO HEADING" button
2. A single horn beep sounds and the mode indicator changes from "AUTO" to "OFF".
To Next Page
Loading...
