CALIBRATION
(SAVE) ( YES )
CALIBRATION
EXTERNAL SENSORS
( NO )
USE GPS SPEED ? YES
52684
Use the GPS input to drive the speed display?
Press "–" to select "NO" or "+" to select "YES."
(SAVE) ( UP )
23592
CALIBRATION
SEA TEMP
(DOWN)
OFFSET = 0 F
Adjust the seawater temperature sensor to
correct display readings that are too high/low.
Press "–" or "+" to calibrate the temperature
display "DOWN" or "UP."
23540
SPEED UNITS
MPH
[DOWN]
[SAVE]
[ UP ]
Changes the units in which speed is displayed.
Choose from: MPH (Miles Per Hour), KN
(Knots), or KMH (Kilometers Per Hour).
[DOWN]
[SAVE]
[ UP ]
23539
DISPLAY UNITS
ENGLISH
Changes units of measurement between
English or metric. Select "DOWN" or "UP" to
change between English or metric units.
[ NO ]
[ YES ]
[SAVE]
46443
SIMULATOR MODE
NO
Enables the simulation mode. (Used for
demonstration purposes only.)
( NO )
( YES )
( SCREENS )
CALIBRATION
EXIT ?
67265
Select "NO" to go through the screen selection
again, "YES" to exit the screens, or
"SCREENS" to go to the screens menu.
SC 1000 SPEEDOMETER
eng 33
To Next Page
Loading...
Need help?
General
