Do you have a question about the Mercury SC1000 and is the answer not in the manual?
Type | Digital Multimeter |
---|---|
Diode Test | Yes |
Continuity Test | Yes |
Operating Temperature | 0°C to 40°C |
Power Supply | 9V Battery |
DC Current Range | 0.1µA to 10A |
Measurement Range | Varies by function |
Explains automatic engine type detection for gauge configuration.
Monitors electrical systems for function, diagnostics, and calibration.
Lists available Tachometer and Speedometer display screens.
Explains how alarm warnings are displayed and what they signify.
Details specific warning messages for tachometer and speedometer displays.
Describes how descriptive text alarms are displayed for newer engines.
Explains how to set and operate cruise control on the Smart Tow Tachometer.
Explains how to set and operate launch control on the Smart Tow Tachometer.
Explains how to set and operate troll control on the System Tach/Speedometer.
Calibrates the brightness and contrast of the gauge lighting.
Allows turning system display screens on and off for the speedometer.
Configures which display screens are shown on the speedometer.
Enables or disables the simulator mode for demonstration purposes.
Configures system sensor inputs for the speedometer.
Selects and calibrates external sensors installed in the system.
Calibrates the brightness and contrast of the gauge lighting.
Allows turning system screens on and off for the tachometer.
Configures which display screens are shown on the tachometer.
Enables or disables the simulator mode for demonstration purposes.
Configures system sensor inputs for the tachometer.
Calibrates the fuel tank level monitoring feature.
Selects and calibrates external sensors installed in the system.