Mercury SC1000 User Manual

TROLL CONTROL
21
4. Use the "+" and "-" buttons to set the desired speed. Use "+"
to increase the set speed and use "-" to decrease the set
speed.
5. If the troll speed is set to a higher speed than the troll control
can maintain, the "TROLL SPEED TOO FAST" display will
appear. Reduce the set troll speed.
6. If the troll speed is set to a slower speed than the troll control
can maintain, the "TROLL SPEED TOO SLOW" display will
appear. Increase the set troll speed.
CANCELING TROLL CONTROL
There are three ways to cancel the troll control:
• Press the "MODE" button when in the troll display screen.
• Move the throttle to a different speed.
• Shift the engine into neutral.

Mercury SC1000 Specifications

General

Type	Digital Multimeter
Diode Test	Yes
Continuity Test	Yes
Operating Temperature	0°C to 40°C
Power Supply	9V Battery
DC Current Range	0.1µA to 10A
Measurement Range	Varies by function