4
Appearance
Each Halo has an LED that changes color according to its status, at least 2 WAN/LAN auto-sensing ports, a power slot, and a Reset button.
See the explanation below:
*Halo H90X(Ver:1.0) is used for demonstration in this guide.
Power Slot:
For connecting Halo to the power socket via
the provided power adapter.
Ethernet Ports:
For connecting Halo to your modem, the
Ethernet outlet or other internet devices.
Reset Button:
Press 1 second to reset Halo to factory default
settings.
Solid Yellow:
Halo is starting up.
Pulsing Yellow:
Halo is being reset.
Solid Blue:
Halo is setting up.
Pulsing Blue:
Halo is ready for setup.
Solid White:
Halo is registered and all is well.
Pulsing White:
Halo is updating its rmware,
please wait.
Solid Red:
Halo has an issue.
Pulsing Red:
Halo is disconnected from main Halo.
LED Status
To Next Page
Loading...
Need help?
General
