Mercusys ME20 - Page 18

11
Chapter 3 Customize Your Network
· You can manually enter the SSID (network name) and password of the network you want to extend, and click
SAVE.
4. Once a host network is selected, the SSID and security type will be automatically
lled in. If the selected network is encrypted, enter the password in the Password
eld.
5. Click SAVE.
• To enable or disable the extended network:
1. Go to Wireless > Extended Network.
2. Extended networks are enabled by default. If you want to disable the wireless
function of a certain band, just clear the Enable checkbox. In this case, all the
wireless settings of this band will be invalid.
3. Click SAVE.
• To change the wireless network name (SSID):
1. Go to Wireless > Extended Network.
2. Create a new SSID in Extended 2.4GHz SSID or click COPY HOST SSID. The value
is case-sensitive.
3. Click SAVE.
Note:
If you have changed the wireless settings via a wireless device, you will be disconnected after the settings are
applied. Please write down the new SSID for future use.