10
Chapter 3 Customize Your Network
Click the icon of the Internet/Router/Range Extender/Clients to view corresponding
information.
3.2 Congure Wireless Network
If you want to extend another host network after Quick Setup, you can refer to
this section. Moreover, you can change the wireless settings for your extended
networks.
Visit http://mwlogin.net, and log in with the password you set for the extender.
• To extend another host network:
1. Go to Wireless > Connect to Host Network.
2. Enable Connect to 2.4GHz Network and click WIRELESS SCANNER to find all
available networks.
3. Select the 2.4GHz host network you want to extend.
Note:
If the network you want to extend is on but not listed, please try the following steps.
· Move the extender closer to your router, and click Refresh in the top-right corner of the list.
To Next Page
Loading...
