15
Chapter 3 Customize Your Network
1. Visit http://mwlogin.net and log in with the password you set for the extender.
2. Go to Settings > Advanced Settings > Access Control.
3. Enable Access Control.
• To block specic device(s):
Note:
Devices connected to the extender via an Ethernet cable cannot be blocked.
1. Select Blacklist and click Add.
2. Select the device to be blocked in the Add Devices table.
3. Click ADD and the selected device(s) will be added to the blacklist.
• To permit specic device(s):
1. Select Whitelist and click Add.
To Next Page
Loading...
