EasyManuals Logo

Mercusys MR30G Quick Installation Guide

Mercusys MR30G
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
4
English
FAQ (Frequently Asked Questions)
Q1. What can I do if the login window does not appear?
If the computer is set to a static IP address, change its settings to obtain an IP address automatically.
Verify that http://mwlogin.net is correctly entered in the web browser.
Use another web browser and try again.
Reboot your router and try again.
Disable and enable the network adapter in use again.
Q2. What can I do if I cannot access the internet?
Check if the internet is working properly by connecting a computer directly to the modem via an Ethernet cable. If
it is not, contact your internet service provider.
Reboot your router and try again.
Open a web browser, enter http://mwlogin.net and run the Quick Setup again.
For cable modem users, reboot the modem rst. If the problem still exists, log in to the web management page of
the router to clone MAC address.
Q3. How do I restore the router to its factory default settings?
With the router powered on, press and hold the Reset button on the router until there is an obvious change of the
LED, and then release the button.
Log in to the web management page of the router to restore the router to factory settings.
Q4. What can I do if I forgot my web management password?
Refer to FAQ >Q3 to reset the router, and then create a password for future logins.
Q5. What can I do if I forgot my wireless network password?
By default, the wireless network has no password.
If you have set a password for the wireless network, log in to the web management page of the router to retrieve or
reset your password.
Note: To learn more about the router, please visit our website
http://www.mercusys.com
.

Other manuals for Mercusys MR30G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercusys MR30G and is the answer not in the manual?

Mercusys MR30G Specifications

General IconGeneral
DSL WANNo
Ethernet WANYes
WAN connection typeRJ-45
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1167 Mbit/s
WLAN data transfer rate (first band)300 Mbit/s
WLAN data transfer rate (second band)867 Mbit/s
Antennas quantity4
Antenna gain level (max)5 dBi
Cabling technology10/100/1000Base-T(X)
Receiver sensitivity11g 6Mbps: -96dBm 11g 54Mbps: -78dBm 11n HT40 MCS7: -74dBm 11n HT20 MCS7: -71dBm 11a 6Mbps: -97dBm 11a 54Mbps: -79dBm 11ac VHT20 MCS8: -74dBm 11ac VHT40 MCS9: -70dBm 11ac VHT80 MCS9: -65dBm
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Firewall securitySPI Firewall, IP/MAC Address Binding
NAT functionalityPort Forwarding, Port Triggering, UPnP, DMZ
Security algorithmsWPA-PSK, WPA2-PSK
Supported network protocolsPPPoE/L2TP/PPTP
Cables includedLAN (RJ-45)
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Power source typeAC
Ethernet LAN (RJ-45) ports3
Package typeBox
Product typeTabletop router
Product colorBlack
LED indicatorsStatus
Weight and Dimensions IconWeight and Dimensions
Depth125.9 mm
Width159.7 mm
Height37.1 mm

Related product manuals