41
Chapter 4 Congure the Router in Wireless Router Mode
5. In the VPN Subnet and Netmask fields, enter the range of IP addresses that can be leased
to the device by the OpenVPN server.
6. Select your Client Access type. Select Home Network Only if you only want the remote
device to access your home network; select Internet and Home Network if you also want
the remote device to access internet through the VPN Server.
7. Click SAVE then click GENERATE to get a new certificate.
Note:
If you have already generated one, please skip this step, or click GENERATE to update the certificate.
8. Click EXPORT to save the OpenVPN configuration file which will be used by the remote
device to access your router.
Step 2. Configure OpenVPN Connection on Your Remote Device
1. Visit http://openvpn.net/index.php/download/community-downloads.html to download
the OpenVPN software, and install it on your device where you want to run the OpenVPN
client utility.
Note:
You need to install the OpenVPN client utility on each device that you plan to apply the VPN function to access your router.
Mobile devices should download a third-party app from Google Play or Apple App Store.
2. After the installation, copy the file exported from your router to the OpenVPN client utility’s
“config” folder (for example, C:\Program Files\OpenVPN\config on Windows). The path
depends on where the OpenVPN client utility is installed.
3. Run the OpenVPN client utility and connect it to OpenVPN Server.
To Next Page
Loading...
Need help?
General
