Meridian DSP33 - Operating the Digital Loudspeakers in; Provides Step-By-Step Instructions for; Preamplifier or Control Unit; Using the DSP Digital

Using the DSP33 Digital Loudspeaker System
19
Using the DSP33 Digital
Loudspeaker System
In systems with a Meridian preamplifier or control unit all of the functions
of the DSP33, including volume, tilt, and bass, are operated via the
controller. For more information refer to the user guide for the preamplifier
or control unit, and you can ignore this chapter.
However, the DSP33 Digital Loudspeaker System can also be connected
directly to up to two digital sources to create a complete, minimum
system. This chapter provides step-by-step instructions for operating the
digital loudspeakers in a system with no Meridian preamplifier or control
unit.