34
Configuring the DSP33 loudspeakers using a computer
Completing the configuration
The final stage in creating a settings file is to save it, and then
store it to the speaker.
To save the current settings
● Choose Save from the File menu or click the Save toolbar
button, to save the changes you have made to the
settings file to your PC hard disk.
To store the settings to the DSP33
loudspeaker
● Click the Store button.
The settings will then be downloaded and the back-panel
indicator will flash.
As the download proceeds the following dialogue box shows its
progress:
If the download was successful the DSP33 will switch itself to
standby and the back-panel indicator will go dim.
To Next Page
Loading...
