To Next PageTo Next Page
Need help?Do you have a question about the Merik 350 H and is the answer not in the manual?
Describes the Merik 350H automation for heavy gates and continuous use.
Highlights the product's functionality in extreme weather conditions (-10°C to +60°C).
Explains the compact monoblock design with oil bath for lubrication and cooling.
Details the two sensitive "by-pass" valves for maximum safety against crushing.
Notes the low maintenance requirement and energy savings of the oleodynamic device.
Guarantees security via electro-lock, with key unlocking.
Highlights precision mechanics and oil fluid for silent movements.
Explains manual activation via keys during emergencies or power outages.
Details on connecting the power cable for the gate operator.
Instructions for attaching the motor to the pillar fastening.
Guidance on the maximum permissible tilt for the installation.
Instructions for attaching the operator to the door leaf.
Procedure for adjusting the closing limit device.
Procedure for adjusting the opening limit device.
Important safety instructions for installation and use, hazard warnings.
Guidelines for connecting power supply and auxiliary equipment safely.
Checks for secure components, operation logic, safety devices, and maintenance.
Recommendations for disposing of materials according to regulations.
Instructions for safely dismantling components for relocation or repair.
Details on operator design, safety standards, and optional accessories.
Lists power, current, force, speed, environmental, and protection ratings.
Guidance on installing electrical systems according to electrical standards.
Diagrams illustrating pillar and leaf fastening points and distances.
Tables and advice for determining correct pillar fastening distances.
References for pillar fastening procedures.
Requirements for the power supply cable.
Instructions for mounting the motor onto the fastening.
Information on the maximum tilt angle for the installation.
Advice on maintaining rod stroke margin for proper operation.
Important notes on fitting the front bracket with bush collar.
Procedure for attaching the operator to the door.
Attention required when tightening screws for limit switch cable.
Instructions for adjusting the opening limit device.
References to diagrams showing unit dimensions.
Advice on creating recesses and adjusting for specific installation needs.
Recommendation to use stops to prevent actuator rod overtravel.
Reference to user guide for manual opening instructions.
Requirement for solenoid latch on leaves longer than 3m.
Emphasizes careful reading of instructions to prevent injury and damage.
Instructions for safe use, intended purpose, and manufacturer liability.
General| Brand | Merik |
|---|---|
| Model | 350 H |
| Category | Garage Door Opener |
| Language | English |
