Merik Security+ 711MD - User Manual

GARAGE DOOR OPENER
Model 711MD
For Residential Use Only
Owner’s Manual
■ Please read this manual and the enclosed safety materials carefully!
■ Fasten the manual near the garage door after installation.
■ Periodic checks of the opener are required to ensure safe operation.
■ The model number label is located on the front panel of your opener.
®
New!
Optional Accessory
Available
See Page 39 for the New
Battery Backup
System

Summary

Introduction

Safety Symbol and Signal Word Review

Explains safety symbols and signal words used in the manual.

Preparing Your Garage Door

Tools Needed

Lists all necessary hand tools for assembly and installation.

Planning: Sectional Doors

Planning: One-Piece Doors

Planning: Gate Installations

Carton Inventory

Hardware Inventory

ASSEMBLY STEP 1

Assemble Rail and Attach Cable Pulley Bracket

Instructions for assembling the rail and attaching the cable pulley bracket.

ASSEMBLY STEP 2

Install the Trolley

Steps to install the trolley onto the rail assembly.

ASSEMBLY STEP 3

Fasten Rail to Motor Unit

Instructions for attaching the assembled rail to the motor unit.

ASSEMBLY STEP 4

Install Chain;Cable and Attach Sprocket Cover

Guidance on installing the chain/cable and sprocket cover.

ASSEMBLY STEP 5

Tighten Chain and Cable

Steps to properly tighten the chain and cable.

INSTALLATION STEP 1

Determine Header Bracket Location

Instructions for determining the correct location for the header bracket.

INSTALLATION STEP 2

Install the Header Bracket

Detailed steps for installing the header bracket on the wall or ceiling.

INSTALLATION STEP 3

Attach Rail to Header Bracket

Procedure for connecting the rail assembly to the header bracket.

INSTALLATION STEP 4

Position the Opener

Instructions on how to position the opener unit correctly.

INSTALLATION STEP 5

Hang the Opener

Steps for securely hanging the opener unit to structural supports.

INSTALLATION STEP 6

Install the Door Control

Guidance on mounting and wiring the wall-mounted door control.

INSTALLATION STEP 7

Install the Lights

Instructions for installing the light bulbs in the opener unit.

INSTALLATION STEP 8

Attach Emergency Release Rope and Handle

Steps to attach the emergency release rope and handle.

INSTALLATION STEP 9

Electrical Requirements

Information on electrical connections and grounding.

INSTALLATION STEP 10

Fasten the Door Bracket

Instructions for attaching the door bracket to the garage door.

INSTALLATION STEP 11

Connect Door Arm to Trolley

Steps to connect the door arm to the trolley assembly.

ADJUSTMENT STEP 1

Program the Travel Limits

Guide to setting the open and close travel limits for the door.

ADJUSTMENT STEP 2

Setting the Force

Instructions for setting the force required for door operation.

ADJUSTMENT STEP 3

Test the Safety Reversal System

Procedure for testing the safety reversal system.

Operation

Using Your Garage Door Opener

How to activate and use the garage door opener.

Operation (Continued)

Using the Wall-Mounted Door Control

Instructions for operating the door using the wall control panel.

To Open the Door Manually

Procedure for manually opening or closing the door.

Care of Your Garage Door Opener

Maintenance Schedule

Recommended maintenance tasks and frequency.

Remote Control Battery

Information on replacing the remote control battery.

Troubleshooting

Common Problems and Solutions

Solutions for common problems with the opener.

Programming

Add or Reprogram Remote Control

Steps to program or reprogram remote controls.

Programming (Continued)

Manage Keyless Entry PIN

Instructions for managing keyless entry PINs.

Motor Unit Assembly Parts

Accessories

How to Order Repair Parts

Warranty Information

Merik Security+ 711MD Specifications

General

Manufacturer	Merik
Type	Garage Door Opener
Technology	Security+
Model	711MD
Motor Type	DC
Horsepower	1/2 HP
Security	Rolling Code
Drive Type	Chain Drive
Maximum Door Height	7 ft