Merrychef eikon e2s - Taking the Appliance Off the Pallet; Mounting the Appliance on a Work Surface

5 Setting up the appliance
eikon e2s Installation and Operating Manual CE 48
5.4 Taking the appliance off the pallet
The weight of your appliance is given in the 'Technical Data' on page 107.
1.
Identify appropriate lifting points.
2.
Lift the appliance from packaging.
Wear appropriate Personal Protective Equipment.
3.
WARNING
 Don't lift the oven from the handle.
 Risk of crushing from the appliance tipping over.
5.5 Mounting the appliance on a work surface
Rules for setting up the appliance safely
Observe the following rules to ensure that the appliance is installed in a stable situation:
 It must be possible to set up the work surface in the installation position so that it cannot tip over or
slide about. The supporting surface must comply with the requirements.
 The work top must have a non-slip surface.